SP is for sale

Yes its a shocker and I am not keen to really let it go, but taking the future in consideration, I think this will be the best choice. Been offered a job outside of Malaysia and thinking of taking it up hence this decision. This is not an urgent or desperate sale. I am only going to let it go, if the price is right. SP is in immaculate condition, extremely low mileage and only driven in the dry. Total car mileage is less than 35,000 km and current engine has only done 3500km since rebuild. Super clean and super trick ride with a lot of spares thrown in. Got a set of wheels for track day too!! Here is the current mod list. If interested do give me a ring at 012-335 0607 or email mugil@troxmal.com.my. Serious buyer only, no scammers, no low ballers and no free test drive! Again due to the age of the car, registered 1999, no loan will be available. Would prefer an enthusiast to buy over and continue the development work!

1 Engine
1.1 SR Composites carbon fibre radiator "slam" panel and Ti Bolt
1.2 Koyo Aluminium Race Radiator
1.3 Samco Sport Silicon Radiator Hose
1.4 Ralliart Radiator Cap
1.5 Ralliart Oil Cap
1.6 Crank Scrapper - 3 pc type
1.7 Earls Super Stock Hose and Econofit Clamps - Engine Breather to Airfilter Hose
1.8 ARP Head Stud Kit
1.9 NGK Iriway 7 spark plugs (X4)
1.10 Earl's Oil Cooler 12x5x2, 16 ROW, -8AN
1.11 Earl's Aluminium Oil Cooler Mounting Kit for 16 row
1.12 Earl's -8 to 3/8 NPT adaptor x 4
1.13 Earl's Swivelseal -8 90 deg hose end x 4
1.14 Earl's Autoflex -8 hose
1.15 K&N air filter injection kit
1.16 Mocal Aluminium Sandwich Plate with Thermostat
1.17 Jenvey Dynamic's 45mm SF Individual Throttle Bodies with JD modfied manifold (port matched), 60mm air horns, linkage kit
1.18 All bottom end rotating assemblies fully balanced
1.19 Z. Speed adjustable cam pulleys (X2)
1.20 4G93T engine block including oil jets
1.21 Matspeed race ported cylinder head
1.22 WRC Motorsports fast road engine mounts (X2)
1.23 Ralliart Group N lower front engine mount
1.24 Ralliart Group N lower rear engine mount
1.25 Cusco Oil Catch Tank with additional breather and fitted with SS braided hoses and Earls AN fittings
1.26 SR Composites carbon spark plug cover
1.27 SR Composites carbon timing belt cover
1.28 SR Composites carbon upper radiator support bracket
1.29 Spool Forged Con Rods with ARP 2000 con rod bolts
1.30 Coolingmist Trunk Mounted Water Injection Kit
1.31 Exedy Racing Clutch with Organic Clutch Plate
1.32 ARP Main Stud Kit
1.33 Meek Peformance Aftermarket Hydraulic Lifters x 16pcs
1.34 Meek Evo3 Performance Clutch Slave Pump
1.35 Wiseco Forged Piston 82mm diameter 11.5:1 comp ratio skirt and piston crown ceramic coated, chromoly rings and 19mm piston pin
1.36 Phenolic Thermal Intake Manifold Gasket
1.37 Mytheology Lightened Crank Pulley with Damper
1.38 MMC Front Case Assembly/Oil Pump New
1.39 ACT Carbon Fibre Airbox Assembly to suit Jenvey Throttle Bodies
1.40 JUN 288 deg inlet and exhaust billet cams - 11mm lift
1.41 JUN Valve Spring
1.42 JUN Titanium Retainer
1.43 Power Entreprise Super Strong Kevlar Timing Belt
1.44 Bosch 412cc Top Feed, High Impedence Fuel Injectors
1.45 Starter - High Speed (Evo 3)
1.46 AP racing clutch master cylinder with remote reservoir and Earls AN fittings
1.47 Coolingmist Super Atomizing injector

2 Fuel System
2.1 Earl's Inline Fuel Filter complete with SS braided hoses and Earls Swivelseal AN fittings
2.2 SARD Fuel Pressure Regulator with SS braided hoses and Earls SwivelsealAN fittings
2.3 Fuel Pressure Gauge
2.4 Greddy Fuel Pressure Sensor
2.5 Earl's Line Clamp and Hose Separator
2.6 Earl's Hose - longer hose fitted for better routing


3 Exhaust System
3.1 RACE 4-1 LP SS Header and Port Matched
3.2 TONNKA SS Rear N1 style rear box with 2.5 in inlet
3.3 TONNKA SS exhaust piping w SS hangers and option of straight pipe and resonator box section
3.4 Hot Bits stainless steel resonators (X2)
3.5 Ralliart exhaust hanger (X2)


4 Electronics/Engine Management
4.1 Haltech Platinum Sport 1000 Standalone ECU
4.2 Dynatek ARC2 CDI Ignition
4.3 Coil on Plugs - Set of 6 coils
4.4 Coil on Plugs - wiring and mounted on CNC machined Aluminium Plate
4.5 Phormula KS-4 Engine Knock Monitor
4.6 HKS DB Chrono Oil Press, Oil Temp and Vacumm Gauges
4.7 Haltech Racepak IQ3 Data Logger Dash
4.8 Innovate Wideband Lambda Sensor - LC1 - wired to Haltech and values displayed on Racepak Dash.
4.9 Racepak USM + Vnet Tee
4.10 Jenvey Dynamics Contactless TPS


5 Chassis/Steering/Bodywork/Aerodynamics
5.1 Ralliart Center Member Front Axle Upper Bushing
5.2 Ralliart Center Member Front Axle Lower Bushing
5.3 Ralliart Rear Upper Arm Bush Bodyside
5.4 Ralliart Rear Lower Arm Bush Bodyside
5.5 Ultra Racing 3 Point Fender Bar
5.6 Ultra Racing C Pillar Bar
5.7 Ultra Racing Room Bar
5.8 Safety21 6 point Dash Dodger Bolt on Roll Cage - powder coated black and with SS316 stiffener plates. All bolts in SS304
5.9 Mitsubishi CP/CT9A Lancer EVO5-7 boot reinforcement bar
5.10 R3 Stage 2 Front Splitter (replica)
5.11 Autofoam automotive high density foam
5.12 SR Composites carbon strut bar - front
5.13 Hot Bits aluminium strut bar - rear
5.14 Proton Wira SE/Arena front grill and mark top
5.15 Mitsubishi CA4A Mirage Asti MIVEC rear spoiler/wing
5.16 Superpro steering rack bush kit
5.17 SR Composites front and rear number plates
5.18 SR Composites carbon pillar garnish
5.19 Racecraft non-vented carbon bonnet
5.20 SR Composites carbon battery tray
5.21 Wiring and termination work to relocate battery to boot
5.22 Odyssey PC680MJ dry cell lightweight race battery

6 Interior
6.1 R3 Carbon Fibre Gear Knob
6.2 Momo Jet Steering Wheel
6.3 Works Bell Rapfix 2 Quick Release Steering Boss kit
6.4 Recaro SPG Carbon Kevlar
6.5 Sabelt 4 point FIA approved Ultralight Harness with Aluminium Adjusters for driver seat
6.6 Sabelt 4 point FIA approved Lightweight Harness with steel Adjusters for passenger seat
6.7 Bride Ultra Low Seat Railing - Driver Side
6.8 6mil Security Tint + 2nd layer Black Tint
6.9 BSCI 40mm Roll Cage Padding - FIA approved
6.10 SR Composites carbon pedals
6.11 Proton Motorsports R3 floor matts

7 Suspension
7.1 Ohlins PCV Coilover 8kg F and 6kg R
7.2 Ohlins Front Top Pillowball Mount
7.3 Ohlins Rear Top Pillowball Mount
7.4 CE9A Lancer EVO2-3 rear upper and lower suspension links
7.5 Superpro PU front lower control arm bush kit
7.6 Stainless steel centre sleeve for front lower arm bush kit (X2)
7.7 Superpro PU rear trailing arm front bush kit
7.8 Stainless steel centre sleeve for trailing arm bush kit (X2)
7.9 Mitsubishi CE9A Lancer EVO2-3 rear lower arm
7.1 Mitsubishi CD9A Lancer EVO1/M21 97 spec front 23mm anti-roll bar
7.11 Superpro PU front anti-roll bar D bush - 23mm
7.12 Superpro PU front anti-roll bar link shoulder bush kit (X8)
7.13 Whiteline rear 18mm adjustable anti-roll bar
7.14 Superpro PU rear anti-roll bar D bush - 18mm
7.15 Mitsubishi CE9A Lancer EVO2-3 rear anti-roll bar link kit

8 Transmission and Drivetrain
8.1 Symborski Gear Shifter Bush
8.2 Titanium Fasteners for Symborski Kit
8.3 Goodridge stainless steel clutch line
8.4 Exedy racing clutch (disc + pressure plate/clutch cover)
8.5 Jun forged chrome molybdenum lightweight flywheel
8.6 Kaaz Powerpot series 1.5 way limited slip differential
8.7 CA4A Mirage MIVEC 4.592 final drive + machined F5M22VRXE gearbox casing to fit FD

9 Brakes
9.1 Wilwood Polymatrix B compound (Part No: 15B-7264K)
9.2 70mm silicon hose for brake ducting - 2m length
9.3 ACT dry carbon air horn
9.4 Goodridge stainless steel brake lines (front and rear)
9.5 Wilwood Dynapro 4 pot calipers
9.6 EBC standard Kevlar brake pads (rear)
9.7 DBA Longlife Slotted brake discs (front)
9.8 DBA Longlife GOLD crossed-drilled and slotted brake discs (rear)
9.9 Ralliart long hub bolt/lug (66mm)
9.10 7075 aluminium alloy CNC machined brake caliper adapter kit and 12mm wheel spacer
9.11 Mitsubishi CE9A Lancer EVO2-3 1" brake master cylinder
9.12 Cusco Brake Cylinder Stopper (BCS)


10 Wheels/Tyres
10.1 P1 Racing Replica 15x7 4x100 rims - Track Use
10.2 Silverstone slicks 19/58-15 - Track Use
10.3 SSR Type C 16" X 7" rims (X4) - Street Use
10.4 Racing Gear forged 7075 aluminium alloy lug nuts
10.5 6061 Aluminium alloy centre bore centering rings (X4)

11 In Car Entertainment
None - just wind down the window and rev to 8.8k rpm

Lubricants, Coolant & Consumables
Motul 300V competition 10w40
Neo Synthetic LW18 gear oil
Neo Synthetic brake fluid
Motul Inugel Radiator Coolant

Water Methanol Injecton

I have now been using water methanol injection for SP over the last one year and I must say I am enjoying it and glad that I decided to install it. There are many benefits of running water injection, and below is the explanation from Coolingmist themselves:

"Water injection, alcohol injection, water methanol injection or methanol injection are all the same thing. The only difference is the fluid you are injecting. Having a chemical intercooler or water injection, methanol injection or alcohol injection will cool the combustion temperature of your engine by cooling your charge. A super fine mist of methanol, water or alcohol combination will evaporate and soak up the heat. This cools your temperatures and raises the effective octane of your fuel. In most cases you will not need to run race fuel and pump gas will be fine. A water injection pump...methanol injection pump or alcohol injection pump is very important. The higher pressure your pump, the better that atomization will be in your water methanol injection system. "

As SP is running a very high compression ratio, it is necessary to find ways to minimize knock and increase ignition timing which are really the key to making power in NA engines. The results of water injection in a turbo charged engined is much greater than NA engines. Nevertheless, I am also interested in the other benefit of water injection, which is a much cleaner engine as well, as it also helps to steam clean the internals, especially those in the combustion chamber.

The kit that I am using is from Coolingmist who my bro Jack, has been using in his previous ride with good performance and reliability. The trunkmount kit comes with the standard 100PSI pump, 1 gallon water tank, piping, injector and mounting hardware. I opted to have the stainless steel braided lines and as well as ordered water injection controller called the Vari-Cool. This controller lets me vary the activation point and also a min and max setpoint, plus the allowance to control the amount of flow into the engine. This allows me to fine tune the water injection flow rate and also have a 50% flow during part throttle application if required. Currently for SP the activation is set using the TPS position. The TPS provides a 0-5v signal, which is then fed to the Vari-Cool controller, and from this we can set at which TPS position the water injection will activate. For example, at 50% TPS or less no water injection, from 50-80% TPS, injection at 50% of flow rate, and at 100%TPS full flow is provided.

This allows me to vary the usage of the water injection depending on how and where I am driving the car. I can also go one step higher by having this 3D mapped by my ECU like my fuel and ignition maps, but didnt want the added complications. I am currently using a 50/50 mix between water and methanol. Havent tried running full methanol although the system and engine is fully capable of this.

I have since changed to the larger pump by Coolingmist which produces 200-250 PSI pressure and also the Coolingmist Super Atomizing Injector for more flow and better atomisation. The higher the pressure, the finer the atomization of the water methanol mixture and provides more heat absorbing capacity. I have also added a LED on the dash to indicate when the pump is operating and this also provides indication if there is problem with the system. So far I am enjoying this mod and also have been stocking up on methanol :)

Enjoy the pictures.

The water tank complete with the pump. This is the earlier version 100psi pump

Another view of the tank and pump assembly

Closeup of the 100 psi pump

The optional stainless steel braided hose along with steel fittings (not shown)

The Vari-Cool controller. Takes in either a pressure (boost) or 0-5v input signal. Green knob is for the lower limit setting (start 50% flow) and red knob for the higher limit setting (start 100% flow).

The mounting hardware

The Vari-Cool controller installed where the radio used to be. Below it is my knock sensor

Tank and pump installed in the boot

I didnt want to drill the boot so a custom mounting tray was fabricated from Aluminium

All installed